CALL / WHATSAPP or SMS - 24 hours) : Maximus 0811824879 - 085776428329 email : maximusak@yahoo.com

Sunday, April 5, 2015

TURNIGY MICRO QUAD V3 PNP ARF - KK2.1 LCD FLIGHT CONTROL BOARD - BRAND NEW (SOLD)

TURNIGY MICRO QUAD V3 PNP ARF - KK2.1 LCD FLIGHT CONTROL BOARD - BRAND NEW

Quadcopter dengan brand dari TURNIGY Micro Quad V3 Plug and Play ini merupakan Upgraded Versi ke 3 dari produk Turnigy Quad dengan ukuran 250mm,  paket quadcopter yang tinggal membutuhkan Transmitter dan Receiver (Remote Control) dan Lipo Batt 2 Cell maka sudah siap terbang / Almost Ready to Fly (Transmiter dan Lipo Batt tidak termasuk)... Quadcopter ini menggunakan 4 ESC Turnigy Plush 6 Ampere dan motor Brushless ..... Panjang secara diagonal dari motor ke motor lainnya : 250 mm... sudah cukup stabil menerbangkan quad TURNIGY ini... Dengan frame warna hitam yang kuat dengan ketebalan frame 1,2 mm dan tahan banting.... Menggunakan Flight Controller KK2.1 termasuk dengan LCD untuk mensetting langsung pada saat Quad ini di  nyalakan / di On kan...  Di dalam Paket TURNIGY Micro Quad V3 disertakan dengan 1 set isi 4 propeller ukuran 5 inch (5030) warna merah dan 1 set isi 4 propeller ukuran 5 inch (5030) warna hitam, 4 Servo extension untuk dipasangkan ke receiver, beberapa baut cadangan dari bahan plastik dan besi, foam double tape serta 4 bolt dan hub nya untuk dipasangkan sebagai pengunci propeller, Box Turnigy di dalamnya sudah terdapat foam hitam yang sebagian sudah di potong dan terbentuk untuk meletakkan Quad, beserta asesoris lainnya di dalamnya yang siap di bawa ke manapun Anda pergi...

Kondisi Quadcopter TURNIGY Micro Quad V3 ini Brand New alias Baru...

Dapat pula Anda berikan tambahan sendiri, mini Camera dan Vtx berikut dengan FPV system, yang memang saat ini sedang Trend menerbangkan Quad 250 sekaligus FPV dengan menggunakan Quad Turnigy V3 ini.... Tentunya dengan Very Low Budget Aerial Photography / FPV....

Berikut adalah penjelasan detail dari TURNIGY Micro Quad V3 ini...

This tiny yet brilliantly designed V3 PNP micro quad makes getting into hobby-grade QuadCopters easy! We've done all the hard work for you by choosing the power system, installing the motors/ESCs, soldering all of the connections and mounting/setting up the control board.

This quad is the real deal, not a toy-ish micro with brushed motors and cute body shells. It features a high performance brushless power system and the highly capable, fully programmable Hobbyking KK2.1 Control Board. The V3 has updated to the KK 2.1, new stronger “Black” frame and added Bolt on prop Hub vs push on style propellers with more powerful motors.

With the Turnigy Integrated PCB Plug and Play Micro Quad, you simply need to add your own 4CH transmitter/receiver, 500-900mAH 2S 7.4V lipoly battery, setup your radio, complete the pre-flight check, mount the propellers and your ready to fly!

Updated to include our KK2.1 series Flight Control system:
The original KK gyro system has been updated to an incredibly sensitive 6050MPU 6 axis accelerometer/gyro system, making this the most stable KK board ever and allowing for the addition of an Auto-level function. At the heart of the KK2.1 is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of memory. An additional 2 motor output channels have been added to the KK2.1 allowing for a total of 8 motors to be controlled (Octocopter) to allow you to use this flight control system in any quad you wish!

Micro Quad Features:
• New bolt on prop adapters and hub props (not push on props)
• New black Frame design with stronger arms and motor mounting
• KK 2.1 Flight Controller
• Lightweight design
• High efficiency brushless power system pre-installed
• Integrated PCB frame making for a tidy wiring layout
• PNP configuration taking the guesswork out of choosing your own components
• KK2.1 LCD flight control board
• New LD 1510 2200kv motors

Included in box:
1 x Turnigy Integrated PCB Plug and Fly Micro Quad (motors/ESCs/ KK2.1 control board pre-installed)
8 x Propellers (4CW & 4CCW) bolt on style hub now
4 x Servo extension leads (for connecting your receiver to control board)

Required items:
500-900mAh 2S 7.4V Lipoly Battery
4 channel transmitter and receiver
Battery charger 

Specs:
Width: 250mm
Height: 85mm
Motor: 4 x LD 1510 2200kv Brushless
ESC: 4 x Turnigy Plush 6A
Props: 4 x 5x3 inch (2CW & 2CCW)
Control Board: Hobbyking KK 2.1 LCD Flight Control 
Battery Connection: JST
















Ditawarkan :
TURNIGY MICRO QUAD V3 PNP ARF - KK2.1 LCD FLIGHT CONTROL BOARD - BRAND NEW
SOLD